Precise runout inspection. Within 10 seconds.

The concentricity gages are used for inspection tasks on external, internal and flat faces on rotating parts. Particularly, the concentricity of two or more diameters can be determined and axial run-out measurements performed.

Features:

  • Robust design with pre-loaded roller bearings
  • Concentricity < 0,002mm
  • Simple handling, quick measurement
  • Suitable for transmitted light

RPG micro for diameters 0,8-10mm

 The concentricity gage type RPG micro is especially suitable for the use on measuring microscopes from different manufacturers. The fixturing holes in the base of the gage allows universal mounting options.

Features:spreitzer concentricity gage rpg micro
• Robust design with pre-loaded roller bearings
• Simple handling, quick measurement
• Suitable for transmitted light

Type Diameter Rol [mm] Rol type Concentricity Drive Dimensions Article number
RPG micro 0,8-10 39 cut-in 0,002 hand 85×85 B701700001

RPG mini for diameters 0,8-20mm

The concentricity gage type RPG mini is especially suitable for the use on measuring projectors, optical coordinates  measuring instruments as well as contour measuring instruments due to its compact design.

 Features:spreitzer Concentricity-gage-RPG-Mini
• Robust design with pre-loaded roller bearings
• Simple handling, quick measurement
• Suitable for transmitted light
• Driven by toothed belt

Type Diameter Rol [mm] Rol type Concentricity Drive Dimensions Article number
RPG 0820 0,8-20 38  cut-in 0,002 hand 120×120 B701200007
RPG 330   3-30 30  cilindric 0,002 hand 120×120 B701200006

RPG AL for inside and outside diameters 0,8 – 50mm

The concentricity gages type RPG AL are especially designed for the measurement of single parts. The articulated arm with a combined holder for dial gauges and electronic length probes serves as an universal holder for gauging  instruments.

Features:spreitzer Concentricity-gage-RPG-AL
• Robust design with pre-loaded roller bearings
• Simple handling, quick measurement
• For one-off inspections by articulated arm

Type Diameter Rol [mm] Rol type Concentricity Drive Dimensions Article number
RPG0825AL 0,8-25 62 cut-in 0,002 hand 160×125 B701000001
RPG 240 AL   2-40 55  cut-in 0,002 hand 160×125 B701000002
RPG 350 AL   3-50 50  cut-in 0,002 hand 160×125 B701000003
RPG 450 AL   4-50 50  cilindric 0,002 hand 160×125 B701000004

RPG for inside and outside diameters 0,8 – 50mm

The concentricity gages type RPG are especially designed for mea-suring in the batch production. Two swivelling gauge holders are used for the external gauging, one gauge slide is used for the internal gauging of rotating parts. All gauge holders can be continuously variable moved on the guide columns. The swivelling in and out of the measuring holder against positive stops prevents repeated adjustments of the measuring instrument at the workpiece.

Features:spreitzer Concentricity-gage-RPG-450
• robust design with pre-loaded roller bearings
• simple handling, quick measurement
• for inspections in batch production by swivelling gauge holder and measuring slide

Type Diameter Rol [mm] Rol type Concentricity Drive Dimensions Article number
RPG0825 0,8-25 62  cut-in 0,002 hand 400×160 B705000001
RPG 240   2-40 55  cut-in 0,002 hand 400×160 B705000002
RPG 350   3-50 50  cut-in 0,002 hand 400×160 B705000003
RPG 450   4-50 50  cylindric 0,002 hand 400×160 B705000004

RPGP with V-blocks for inside and outside diameters 1-26mm

The concentricity gage RPGP can be used for measuring the concentricity of round workpieces with a diameter up to 26 mm. The two V-blocks with carbide surface, the the scrolling device and the articulated arm with holder for gauging instruments are variable movable on the base plate. One of the V-blocks is height adjustable.

Features:spreitzer Concentricity gage RPGP
• Hardened and ground base plate
• Two movable V-blocks with clamp lever and carbide work piece support each
• Universal stop can be mounted flat and perpendicular in relation to the V-blocks
• Movable scrolling device
• Articulated arm with holder for gauging instruments The concentricity is read directly.

Type Diameter T-slots Rol type Drive Dimensions Article number
RPGP 350 1-26 10H7  2V-blocks fix hand 350×160 B703000004
RPGP 350H 1-26 10H7  1V-block fix 1V-block adjustable hand 350×160 B703000003

RPGR with roller wheels for inside and outside diameters max. 240 mm

The concentricity gage RPGP can be used for measuring the concentricity of round work pieces with a diameter up to 26 mm. The two V-blocks with carbide surface, the scrolling device and the articulated arm with holder for gauging instruments are variable movable on the base plate. One of the V-blocks is height adjustable. An universal use with different geometries of the work piece is possible.

Features:spreitzer Concentricity-gage-RPGR
• Hardened and ground base plate
• Two movable roller wheels with clamp lever One support can be adjusted in height to compensate a diameter difference of the work piece up to 60 mm.
• Universal stop can be mounted flat and perpendicular in relation to the V-blocks
• Movable scrolling device
• Articulated arm with holder for gauging instruments The concentricity is read directly.

Type Diameter T-slots Rol type Concentricity Drive Dimensions Article number
RPGR 600 max. 240 10H7 movable rolers 0,002 hand 600×200 B703000002
RPGR 1000 max. 240 10H7 movable rolers 0,002 hand 1000×200 B703000005

RPGS with tailstock for inside and outside diameters  1-400mm

The concentricity gages RPGS can be used for measuring radial and axial run-out of cylindrical work pieces. The tailstocks are variable movable on the base plate. One tailstock is supplied with a axially movable quill.

 Features:spreitzer Concentricity-gage-RPGS-200_650
• Working table made of high-quality casting / hard stone
• Right tailstock with axially movable quill
• Left tailstock with fixed centre
• Centre height from 50 – 200 mm
• Centre width from maximum of 200 – 650 mm

Type Diameter T-slots max. Width [mm] Drive Dimensions Article number
RPGS 100 200 12H7 450 hand 700×180
RPGS 150 300 12H7 450 hand 700×180
RPGS 200 2-01 12H7 650 hand 1100×180