3Ruler system, the first mechanical reference system for WEDM

System 3R’s ruler system – 3Ruler – was developed for machining medium-size and large workpieces in machines with a parallel or U-shaped machine table, as well as in machines with a frame table. The rulers, which have built-in height adjustment, are used singly or in pairs. A comprehensive range of accessories gives the rulers an unsurpassed range of applications. With the aid of 3Ruler, rectangular or round workpieces, large or small, lightweight or heavy, are located on the machine zero line, without risk of collision. System 3R’s WEDM accessories upgrade the versatility and productivity of your machine by practically eliminating setup times.

Features

  • Max. work piece weight 25 kg
  • Repeatability <0.01mm
  • High long term accuracy
  • High stability
  • New system for higher flushing pressure

Products

3R-200.1J-U

3R-200.1J-U Reference element WEDM

  • Universal 140 mm reference element for machines with zero-line table
  • With oval holes
  • For all machines that have M8 holes
  • In the machine table 30 to 40 mm from the edge of the table.
  • Weight 0.4 kg

See drawing >

3R-200.XJ-X

3R-200.XJ.X Reference element WEDM

  • Reference elements for machines with zero-line table
  • The length (L), hole spacing (C) and hole edge spacing (B)
  • The hardened reference elements are matched to the machine in question
  • Note: When ordering, state machine manufacturer and type
  • Supplied with end stops

3R-225

3R-218S Holder set

  • Can be moved infinitely along the entire reference element
  • Weight per set 0.4 kg
3R-225.2

3R-225.2 Reference stop

  • For positioning 3Ruler on the references
  • The stops have adjusting screws
  • Supplied in sets of two
  • Weight per set 0.6 kg

3R-239.1

3R-239.1 Ruler vice

  • Movable jaws
  • For mounting two rectangular workpieces at the same time
  • Detachable Z support tabs
  • Ensure simple setting-up
  • Weight 1 kg
3R-239.2

3R-239.2 Low-profile holder

  • For clamping thin workpieces
  • Hardened
  • Clamping range 0-27 mm
  • Supplied in sets of four
  • Weight per set 0.6 kg
3R-239.11

3R-239.11 Double ruler vice

  • Movable jaws
  • For mounting two rectangular workpieces at the same time
  • Detachable Z support tabs
  • Ensure simple setting-up
  • Weight 1 kg
3R-239.11

3R-239.11 Double ruler vice

  • Movable jaws
  • For mounting two rectangular workpieces at the same time
  • Detachable Z support tabs
  • Ensure simple setting-up
  • Weight 1 kg
3R-239.3

3R-239.3 V-holder

  • For clamping round workpieces
  • Hardened
  • Clamping range Ø25-300 mm
  • Weight 0.9 kg
3R-239.22

3R-239.22 Zero-line support tab 5 mm

  • Hardened
  • Maximum workpiece weight per stop 50 kg
  • Supplied in sets of two
  • Weight .. kg
3R-294.1

3R-294.1 Vice

  • For work pieces up to 17 mm
  • Mounts on 3R-237.2, 3R-292.12, 3R-292.66HP, 3R-294
  • Maximum work piece weight 5 kg
  • Tightening torque 3 Nm
  • Weight 0.5 kg

See drawing >

3R-294.2

3R-294.2 Vice

  • Mounts on 3R-237.2, 3R-292.12, 3R-292.66HP, 3R-294
  • Hardened ruler in the 3Ruler
  • Maximum work piece weight 5 kg
  • Torque 3 Nm
  • Weight 1.2 kg

See drawing >

3R-294.6

3R-294.6 Multiple holder

  • Mounting 4 workpieces Ø5-13 mm
  • Or a ruler in the 3Ruler system
  • Mounts on 3R-237.2, 3R-292.12, 3R-292.66HP, 3R-294
  • Tightening torque 3 Nm
  • Weight 0.6 kg
3R-239.20

3R-239.20 3Ruler kit

  • Kit for clamping rectangular
  • Round or thin work pieces

Contents:

  • 3R-239.1      Ruler vice
  • 3R-239.2      Low-profile holder
  • 3R-239.3      Vee holder
  • 3R-914-10L  Torque wrench 8 Nm
  • 3R-33-03      Allen key 3 mm
  • 3R-33-04      Allen key 4 mm
3R-209-610.1

3R-209-610.1

  • 1x 3R-209-610
  • 1x 3R-333-03
  • 1x 3R-333-05
  • Several extra material
3R-209-860.1

3R-209-860.1

  • 1x 3R-209-860
  • 1x 3R-333-03
  • 1x 3R-333-05
  • Several extra material
3R-209-610.2

3R-209-610.2

  • 2x 3R-209-610
  • 1x 3R-333-03
  • 1x 3R-333-05
  • Several extra material
3R-209-610.3

3R-209-610.3

  •  1x 3R-209.610
  • 2x 3R-261.1
  • 1x 3R-333-03
  • 1x 3R-333-05
  • Several extra material
3R-209-860.3

3R-209-860.3 Econo ruler set

  •  1x 3R-209.860
  • 2x 3R-261.1
  • 1x 3R-333-03
  • 1x 3R-333-05
  • Several extra material
3R-209-610.4

3R-209-610.4

  • 1x 3R-209.610
  • 1x 3R-261.1
  • 1x 3R-209.1
  • 1x 3R-333-03
  • 1x 3R-333-05
3R-209-860.4

3R-209-860.4 Econo ruler set

  • 1x 3R-209.860
  • 1x 3R-261.1
  • 1x 3R-209.1
  • 1x 3R-333-03
  • 1x 3R-333-05
3R-209.33

3R-209.33 Universal holder econo

  • For mounting round and square work pieces
  • Diameter 15-110mm or 120x120mm
  • Hardened steel
  • Weight 1.5 kg
3R-209.1

3R-209.1 Vice econo

  • For square work pieces
  • Max. work piece weight 15 kg
  • Max. work piece weight with 2 vices 200 kg
  • Torque 8Nm
  • Weight 0.7 kg
3R-209.3

3R-209.3 V-holder econo

  • For mounting round work pieces
  • Diameter 25-130mm
  • Hardened steel
  • Weight 0.9 kg
S150550

S150550 Set ICS Zeroline Go!

  • For mounting directly on the machine table
  • C 666 020 Clamping element 300 mm x1
  • C 660 040 Clamping element 180 mm x1
  • C 642 050
  • N 150 000 Stop, +4 mm x4
  • C 666 022 Stop, zero line x4
  • S 150 350 Set of screws x1
  • N 153 010 Bush M8 x6
  • N 153 020 Bush M6 x6
  • E 100 007 Set of Allen keys x1
S150500

S150500 Set ICS Standard Mini

  • For mounting directtly on the machine table
  • C 666 020 Clamping element 300 mm x1
  • C 660 040 Clamping element 180 mm x1
  • N 150 000 Stop, +4 mm x4
  • C 666 022 Stop, zero line x4
  • S 150 350 Set of screws x1
  • N 153 010 Bush M8 x6
  • N 153 020 Bush M6 x6
  • E 100 007 Set of Allen keys x1
C666040

C666040 Clamping element

  • Directly to the machine table.
  • For clamping ICS B and ICS C holders
  • Z-reference on -4mm or 0 mm
  • Maximum weight 50 Kg
  • Weight 3.1 kg

See drawing >

C666020

C666020 clamping element

  • Directly to the machine table
  • For clamping ICS B and ICS C holders
  • Z-reference on -4mm or 0 mm
  • Maximum weight 50 Kg
  • Weight 5.3 kg

See drawing >

3R-239-XXX 3Ruler

  • The rulers are available in various lengths (-XXX)
  • For different machines
  • The cross-section is matched to the length to ensure optimal stability
3R-239-XXX
XXX = length (mm)371-595596-950> 950
Width (mm)45608686
Height (mm)30303636
Eccentric stops supplied1111
Quick fasteners supplied2222
Zero line tabs supplied2235
5 mm tabs supplied2223
Clamps supplied2235

3R-239-XXX-D Double sided 3Ruler

  • Double sided rulers are available in various lengths (-XXX)
  • For different machines
  • The cross-section is matched to the length to ensure optimal stability
  • With these rulers, accessories can be mounted on both sides of the ruler
3R-239-XXX-D
XXX = length (mm)371-595596-950> 950
Width (mm)45608686
Height (mm)30303636
Eccentric stops supplied2222
Quick fasteners supplied2222
Zero line tabs supplied44410
5 mm tabs supplied4446
Clamps supplied44610