Macro WEDM, het breedste programma op de markt

  • Door consistent gebruik van de 3R technologie kunt u accessoires overbrengen tussen verschillende machines.
  • U kunt dit doen zonder verlies van nauwkeurigheid, omdat de repeteerbaarheid van de accessoire-verbinding binnen 0,002 mm blijft.
  • Wanneer u een Macro opname als basiselement neemt op uw machine, kunt u al uw machines met elkaar verbinden om één enkel systeem te vormen.
  • Verplaats het werkstuk van draadvonkmachine via zinkvonker naar slijpmachine, zonder aansluitend uitlijnen – snel en exact.
  • En wanneer u een automatische Macro opname kiest, kunt u 24 uur per dag onbemand produceren als u dat wilt.
Brochure wedm

Brochure wedm

 

Kenmerken

  • Max. werkstukgewicht 15 kg
  • Klemkracht 7 kN
  • Repeteerbaarheid <0.002 mm
  • Hoge nauwkeurigheid
  • Hoge stabiliteit
  • Nieuw systeem voor een hogere spoeldruk

Chucks

3R-602.10-1

3R-602.10-1 Automatic pneumatic table chuck

  • Required air pressure 6±1 bar
  • Clamping force 7000N
  • Recommended drawbar 3R-605.10
  • Air-blast cleaning of the Z-references
  • Weight 1.1 Kg

See drawing >

3R-602.26

3R-602.26 Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.5RS
  • Weight 1.1 Kg

See drawing >

3R-602.27

3R-602.27 Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.27RS
  • Weight 1.1 Kg

See drawing >

3R-602.4-1

3R-602.4.1 Automatic pneumatic table chuck

  • Required air pressure 6±1 bar
  • Clamping force 4500N
  • Recommended drawbar 3R-605.1RS
  • Air-blast cleaning of the Z-references
  • Weight 3.7 Kg

See drawing >

3R-600.24RS

3R-600.24RS Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.27RS
  • Weight 1.1 Kg

See drawing >

3R-460.46

3R-600.24-4RS Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.2RS
  • Weight 1 Kg

See drawing >

3R-602.4-1

3R-217-1 Macro 3R-block manual

  • Clamping force 6 kN
  • Fixed index positions 24×15°
  • Required drawbar 3R-605.2RS
  • Tightening torque 6 Nm
  • Vernier scale
  • Weight 5.4 Kg

See drawing >

Pallets

3R-206.10

3R-206.10 Master pallet

  • Master for horizontal Macro chucks
  • One long side ground to the Macro references
  • Supplied with engraved dimensions
  • Supplied with drawbar 3R-605.10

3R-606

3R-606.2 Master pallet

  • Master for vertical Macro chucks
  • Cylinder ground to the Macro references
  • Supplied with engraved dimensions
  • Supplied without drawbar

Spare parts

3R-262HP

3R-262HP Leveling adapter Macro

  • Adjustable in three axes
  • Adapted for automatic changing
  • Ready for code carrier
  • Recommended maximum load 15 kg
  • Weight 2.4 Kg

See drawing >

3R-266.4

3R-266.4 Fixed adapter Macro

    • Adapted for automatic changing
    • Supplied without drawbar
    • Ready for code carrier
    • Recommended maximum load 15 Kg
    • Weight 1.4 Kg

    See drawing >

    3R-622.6

    3R-622.6 Manual macro chuckling

      • Chuck adapter for mounting 90° Macro holders
      • Supplied with drawbar 3R-605.5RS
      • Fixed index positions 4×90º
      • Ready for code carrier holder 3R-U30638
      • Weight 2.3 Kg

      See drawing >

      3R-293.33

      3R-293.33 Universal holder

      • Holder for round workpieces 8-100 mm
      • Rectangular workpieces up to 100 mm
      • Recommended maximum workpiece weight 7 kg
      • Recommended tightening torque 3 Nm
      • Weight 1.5 Kg

      See drawing >

      3R-292.3S

      3R-292.3S Universal holder

        • Holder for round workpieces <90 mm
        • Rectangular workpieces up to 100×90 mm
        • Maximum workpiece weight 7 kg
        • Recommended tightening torque 4 Nm
        • Weight 2.3 Kg

        See drawing >

        3R-294

        3R-294 Adapter

          • For mounting 3R-294.1 on a levelling adapter
          • For mounting 3R-294.2 on a levelling adapter
          • For mounting 3R-294.6 on a levelling adapter
          • Recommended maximum load 7 Kg
          • Weight 0.6 Kg
          3R-293.33

          3R-208.6 Macro Vee Block

          • Rust resistant steel hardened
          • Equipped with 70x70x12.5 Macro reference element
          • Maximum load weight 15 Kg
          • Adjustable (up, down)
          • Weight .. Kg

          See drawing >

          3R-292.23

          3R-292.23 Angled holder

            • Supplemented with 3Ruler accessories
            • Weight 3 Kg

            See drawing >

            3R-294

            3R-292.66HP Magnum holder

            • Supplemented with 3Ruler accessories
            • Mounts on HP mounting head
            • Weight 3 Kg

            See drawing >

            3R-293.33

            3R-237.2 Holder

            • For fixture, workpiece or 3R-239.2, 3R-239.3,
              3R-294.1, 3R-294.2, 3R-294.6 and 3R-402.1.
            • Recommended maximum workpiece weight 7 Kg
            • Weight 0.6 Kg

            See drawing >

            3R-292.23

            3R-294.6 Multiple holder

              • For simultaneous mounting of four workpieces
                Ø5-13 mm. Mounts on 3R-237.2, 3R-294, 3R-
                292.66HP or a ruler in the 3Ruler system
              • Recommended tightening torque 3 Nm
              • Weight 0.6 Kg

              See drawing >

              3R-SSP012

              3R-SSP012 Service set 3R-602.10-1

              • Spare part kit for 3R-602.10-1
              • Complete set
              • For yearly maintenance

              Vices

              3R-293.33

              3R-292.1 SuperVice

              • Vice for horizontal clamping of rectangular workpieces <77 mm
              • Recommended maximum workpiece weight 3 Kg
              • Recommended tightening torque 3 Nm
              • Weight 0.6 Kg

              See drawing >

              3R-292.3S

              3R-292.2 SuperVice

                • Vice for horizontal clamping of rectangular workpieces <100 mm
                • Recommended maximum workpiece weight 5 Kg
                • Recommended tightening torque 3.5 Nm
                • Weight 0.9 Kg

                See drawing >

                3R-294

                3R-292.3 SuperVice

                • Vice for horizontal clamping of rectangular workpieces <100 mm
                • Recommended maximum workpiece weight 7 Kg
                • Recommended tightening torque 7 Nm
                • Weight 1.1 Kg

                See drawing >

                3R-293.33

                3R-292.31 SuperVice

                • Vice with solid jaws for horizontal clamping workpieces <100mm
                • Recommended maximum workpiece weight 7 Kg
                • Recommended tightening torque 7 Nm
                • Weight 1.1 Kg

                See drawing >

                3R-292.3S

                3R-292.6HP SuperVice Magnum

                  • Vice for horizontal clamping workpieces <155 mm
                  • Note: Mounts on HP, Magnum or MacroTwin levelling adapter
                  • Maximum workpiece weight 12 Kg
                  • Tightening torque 15 Nm
                  • Weight 2.8 Kg

                  See drawing >

                  3R-294

                  3R-292.6S SuperVice Magnum

                  • Vice for horizontal clamping of rectangular workpieces >150 mm
                  • Note: Mounts on HP, Magnum or MacroTwin levelling adapter
                  • Maximum workpiece weight 12 Kg
                  • Tightening torque 10 Nm
                  • Weight 2.7 Kg

                  See drawing >

                  3R-293.33

                  3R-292.61HP SuperVice

                  • Vice with solid jaws for clamping <150mm
                  • Maximum workpiece weight 12 Kg
                  • Recommended tightening torque 15 Nm
                  • Weight 2.8 Kg

                  See drawing >

                  3R-292.3S

                  3R-292.92 SuperVice

                    • Vice with 30-degree dovetail connection
                    • Removable middle jaw allows clamping
                    • Maximum weight 7 Kg
                    • Tightening torque 7 Nm
                    • Weight 1.1 Kh

                    See drawing >

                    3R-294

                    3R-293.3 SuperVice

                    • Vice for horizontal clamping of round workpieces 8-90 mm
                    • Recommended maximum workpiece weight 7 Kg
                    • Recommended tightening torque 7 Nm
                    • Weight 1.7 Kg

                    See drawing >

                    3R-293.33

                    3R-293.6HP SuperVice Magnum

                    • Vice for horizontal clamping of round workpieces 15-155 mm
                      Note: Mounts on HP, Magnum or MacroTwin levelling adapter
                    • Maximum workpiece weight 12 Kg
                    • Recommended tightening torque 15 Nm
                    • Weight 4.5 Kg

                    See drawing >

                    3R-294.1

                    3R-294.4 Vice

                    • Vertical clamping of workpieces up to 25mm
                    • Maximum workpiece weight 7 Kg
                    • Recommended tightening torque 3 Nm
                    • Weight 1.4 Kg
                    3R-294.2

                    3R-294.2 Vice

                    • Mounts on 3R-237.2, 3R-294, 3R-292.66HP
                    • Mounts in the 3Ruler system or Macro element
                    • Maximum workpiece weight 5 Kg
                    • Recommended tightening torque 3 Nm
                    • Weight 1.2 Kg

                    See drawing >

                    3R-294.1

                    3R-294.1 Vice

                    • For clamping work pieces up to 17 mm
                    • Mounts on 3R-237.2, 3R-294 or 3Ruler system
                    • Maximum work piece weight 2.5 Kg
                    • Recommended tightening torque 3 Nm
                    • Weight 0.5 Kg

                    See drawing >

                    3R-294.3

                    3R-294.3 Vice

                    • Vertical clamping of workpieces up to 100mm
                    • Maximum workpiece weight 7 Kg
                    • Recommended tightening torque 7 Nm
                    • Weight 0.7 Kg