Macro HP en standaard, vast referentiesysteem voor kleinere machines

  • Wie wil concurreren in de wereldwijde maakindustrie moet ieder aspect van efficiëntie bestuderen.
  • Waar het om gaat is om bij iedere machine zoveel mogelijk spiluren te realiseren. De machines zijn alleen winstgevend wanneer ze produceren – alleen dan!
  • Een referentiesysteem dat de insteltijden reduceert tot enkele minuten – One Minute Set-up.
  • Macro met referenties van gecemtnteerd hardmetaal wat een ongeëvenaarde slijtweerstand en levensduur geeft.
  • Een systeem dat de doorlooptijd minimaliseert, en dat dankzij zijn precisie, uitval praktisch elimineert.
  • Een systeem dat flexibiliteit en winstgevendheid vergroot.
  • Een systeem dat de concurrentiekracht verhoogt en het succes van zijn gebruikers garandeert.
Brochure Macro

Brochure Macro HP

Kenmerken:

  • Max. werkstukgewicht 50 kg
  • Klemkracht 6 kN
  • Repeteerbaarheid <0.002 mm
  • Hoge nauwkeurigheid
  • Hoge stabiliteit
  • Max. productafmeting 150×150 mm

Chucks

C219000 Pneumatic chuck GPS240

3R-600.1-30 MacroStd pneumatic chuck

  • Permanent mounting machine spindle or the machine table
  • Required drawbar 3R-605.1
  • Fixed index positions 4×90°
  • Turbo locking
  • Weight 4 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.10-3 MacroHP Pneumatic chuck

  • Required drawbar 3R-605.1 or 3R-605.4
  • Required air pressure 6±1 bar, turbo
  • Fixed index positions 4×90°
  • Air-blast cleaning of the Z-references
  • Weight 4.4 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-600.10-30 MacroStd pneumatic table chuck

  • Required drawbar 3R-605.1 or 3R-605.4
  • Required air pressure 6±1 bar, turbo
  • Fixed index positions 4×90°
  • Air-blast cleaning of the Z-references
  • Weight 4.4 Kg

See drawing >

3R-770-4 Automatische pneumatische tafel chuck, met geslepen referentiesysteem

3R-600.10-31 MacroStd pneumatic chuck

  • Automatic chuck with airgun connection
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.1 or 3R-605.4
  • Air-blast cleaning of the Z-references
  • Weight 4.4 Kg

See drawing >

3R-90356.10-90576.05 Automatische pneumatische tafel chuck

3R-600.14-30 MacroStd pneumatic chuck, low profile

  • Pneumatic chuck for permanent mounting on the table
  • Required drawbar 3|R-605.2
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Weight 0.8 Kg

See drawing >

3R-90356.10-90576.05

3R-600.15-3 MacroStd pneumatic chuck, RS

  • Drawbar 3R-605.2RS included
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Rust resistant
  • Weight 0.8 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.20 MacroHP manuel chuck

  • Required drawbar 3R-605.1 or 3R-605.4
  • Fixed index positions 4×90°
  • Tightening torque 4 Nm
  • Carbide reference
  • Weight 3.6 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.22 MacroStd manuel lathe chuck

  • With setting screws for centring
  • Required drawbar 3R-605.2
  • Tightening torque 6 Nm
  • Fixed index positions 4×90°
  • Weight 2.1 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-600.23-S MacroStd manuel chuck

  • Tightening torque 6 Nm
  • Required drawbar 3R-605.2
  • Fixed index positions 4×90°
  • Flushing connection
  • Weight 0.7 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.24-S MacroStd manuel table chuck

  • Manuel chuck for mounting on the table or spindle
  • Required drawbar 3R-605.2
  • Fixed index positions 4×90°
  • Flushing connection
  • Weight 0.7 kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.24-4RS MacroStd manuel chuck

  • Required drawbar 3R-605.2RS
  • Fixed index positions 4×90°
  • Grinded front edge
  • Rust resistant
  • Weight 1 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-600.24RS MacroStd manual chuck

  • Required drawbar 3R-605.2RS
  • Clamping force 6000N
  • Fixed index positions 4×90°
  • Rust resistant
  • Weight 0.7 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.24-V MacroStd manual VDP table chuck

  • Required drawbar 3R-605.2
  • Tightening torque 6 Nm
  • Building-in height 85 mm
  • Centre spacing 63 to 100 mm
  • Weight 6 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.28-S MacroStd manual chuck, low profile

  • Required drawbar 3R-605.2RS
  • Fixed index positions 4×90°
  • Grinded front edge
  • Rust resistant
  • Weight 1 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-600.84-3 MacroHP pneumatic chuck

  • Required drawbar 3R-605.1
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Turbo locking
  • Weight 4 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.84-30 MacroStd pneumatic, machine-adapted chuck

  • Four M6 clearance holes Ø 45 mm
  • Required drawbar 3R-605.1
  • Required air pressure 6±1 bar
  • Turbo locking
  • Weight 2.7 kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.84-31 MacroStd pneumatic

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-600.84-30 MacroStd pneumatic, machine-adapted chuck

  • Four M6 clearance holes Ø 45 mm
  • Required drawbar 3R-605.1
  • Required air pressure 6±1 bar
  • Turbo locking
  • Weight 2.7 kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.86-1 MacroStd pneumatic, machine-adapted chuck

  • Required drawbar 3R-605.1
  • Required air pressure 6±1 bar
  • Air-blast cleaning of the Z-references
  • Flushing connection
  • Weight 2.2 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-600.86-3 MacroHP pneumatic chuck

  • Required drawbar 3R-605.1
  • Required air pressure 6±1 bar
  • Air-blast cleaning of the Z-references
  • Turbo locking
  • Weight 4 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-602.81 MacroStd pneumatic table chuck, low profile

  • Pneumatic chuck for mounting  on the table
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.1
  • Weight 1 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-602.81RS MacroStd pneumatic table chuck

  • Pneumatic chuck for mounting  on the table
  • Required air pressure 6±1 bar with turbo locking
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.10
  • Weight 1 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-610.21 MacoStd manuel table chuck

  • Manuel Three ground faces for vertical/horizontal
  • Required drawbar 3R-605.2
  • Fixed index positions 4×90°
  • Flushing duct
  • Weight 2.2 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-610.21-S MacroStd pneumatic table chuck

  • Pneumatic chuck with integral air unit horizontal/vertical
  • Tightening torque 6 Nm
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.2
  • Weight 3.5 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-610.46-30 MacroStd pneumatic table chuck

  • Pneumatic chuck with integral air unit horizontal/vertical
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.1 or 3R-605.4
  • Weight 4.4 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-SP24460 MacroStd pneumatic chuck

  • Pneumatic chuck for build-in, in a fixture or B-axis
  • Required air pressure 6±1 bar
  • Fixed index positions 4×90°
  • Air-blast cleaning of Z-references
  • Weight 1.8 Kg

See drawing >

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-SP26771-RS MacroHP pneumatic chuck

  • Pneumatic chuck with integral air unit horizontal/vertical
  • Tightening torque 6 Nm
  • Fixed index positions 4×90°
  • Required drawbar 3R-605.2
  • Weight 3.5 Kg

See drawing >

C219000 Pneumatic chuck GPS240

3R-SP29828 MacroHP Pre-set chuck

  • For pre-set station outside machine
  • Embraces drawbar 3R-605.1 and 3R-605-2
  • Manual lock
  • Able to mix Macro and Macro Magnum pallets
  • Weight … Kg

C219000 Pneumatic chuck GPS240

3R-US611.4 Macro 3-Jaw chuck

  • For 0-3 mm electrodes
  • Weight 0.8 kg

3R-770-5 Automatische pneumatische tafel chuck, lucht verbinding

3R-US90-601 Gate chuck

  • For collets ER-32
  • Index positions at 0,30,45,60 and 90°
  • Other angles are set with a sine rule
  • Weight 1.1 kg
3R-771.2 Voorbewerkte pallet 280x280mm

3R-601.3 MacroHP pallet 70x70 mm, RS

  • 3Refix Ø10 mm
  • Adapted for automatic changing
  • Ready for code carrier
  • Fixed index positions 4×90°
  • Weight 1 kg

See pallet drawing >

3R-772.2 Geslepen pallet 280x280mm

3R-601.1E-P MacroHP pallet 70x70 mm

  • Adapted for automatic changing
  • Ready for code carrier
  • Rust-resistant
  • Supplied in sets of 5
  • Weight per set 3.2 kg

See pallet drawing >

3R-CH771.35 Top

3R-601.116-PA Pallet unharded Ø116 mm

  • Mounted on pallet 3r -651.75
  • For automatic changing
  • Flatness 0.002 mm
  • Set off 1 piece
  • Weight 1.8 kg

Pallets

3R-774-AL Pallet 400x400mm

3R-601.116-75PA Pallet Ø116 mm

  • Mounted on pallet 3r -651.75-P
  • For automatic changing
  • Ready for code carrier
  • Set off 1 piece
  • Weight 1.8 kg
3R-DE772-T8.40 Pallet met T-gleuf

3R-601.52 Macro pallet Ø116 mm RS

  • For automatic changing
  • With 3Refix Ø10 mm
  • Rust-resistant
  • Adapted for automatic change
  • Weight 1.9 kg

3R-601.7E-P Macro pallet 70x70 mm hardened

  • Hardened cast-iron pallet
  • For automatic changing
  • Fixed index positions 4×90°
  • Set off 5 pieces
  • Weight 3 kg

See pallet drawing >

SPR Magnet Dynafix

3R-651.3 MacroHP pallet 52x52 mm

  • 3Refix Ø10 mm
  • Adapted for automatic changing
  • Ready for code carrier
  • Flushing duct
  • Weight 0.5 kg

See pallet drawing >

SPR Magnet Dynafix

3R-651.70-P Macro pallet

  • Unhardened pallet
  • including reference element 3r-651.7-P
  • Adapted for automatic changing
  • Ready for code carrier
  • Weight 1 kg

See pallet drawing >

SPR Magnet Dynafix

3R-651E-P Macro pallet 54x54 hardened

  • For automatic changing
  • With holes for 4 fixing screws
  • Rust-resistant
  • Set off 8 pieces
  • Weight 0.4 kg

See pallet drawing >

SPR Magnet Dynafix

3R-651.7E-P Macro pallet 54x54 hardened

  • Hardened cast-iron pallet
  • For automatic changing
  • Flatness 0.002 mm
  • Set off 8 pieces
  • Weight 0.2 kg
SPR Magnet Dynafix

3R-651.7E-XS Macro pallet 54x54

  • Hardened pallet for workpieces
  • For automatic changing
  • Flatness 0.002 mm
  • Set off 8 piece
  • Weight 0.2 kg

See pallet drawing >

SPR Magnet Dynafix

3R-651.75E-P Macro pallet round 75mm

  • For automatic changing
  • With holes for 4 fixing screws
  • Rust-resistant
  • Set off 8 pieces
  • Weight 0.4 kg

See pallet drawing >

3R-776.1-2 Hoofd pallet

3R-659.16-P Macro collet holder ER-16

  • For collets ER-16
  • Workpiece size 0.5-10 mm
  • Flushing duct
  • Building-in height 62 mm
  • Weight 0.8 kg
3R-90356.22 Dynafix Adapter

3R-659.20-P Macro collet holder ER-20

  • For collets ER-20
  • Workpiece size 1-13 mm
  • Flushing duct
  • Building-in height 69 mm
  • Weight 1.2 kg
3R-90356.22 Dynafix Adapter

3R-659.16-P Macro collet holder ER-32

  • For collets ER-32
  • Workpiece size 2-20 mm
  • Flushing duct
  • Building-in height 94 mm
  • Weight 1.2 kg
3R-776.1-2 Hoofd pallet

3R-406.9 Macro-MacroJunior Manual chuck adapter 90°

  • Horizontal mounting of MacroJunior holders in Macro system
  • Adapted for automatic changing
  • Rust-resistant
  • Fixed index positions 3×120°
  • Weight 2.4 Kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-603.9 Manual chuck adapter

  • Horizontal mounting mini holders in Macro system
  • Rust-resistant
  • Flushing connection
  • Weight 1.9 kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-466.4033 Macro-MacroJunior Manual chuck adapter

  • Axial locking screw with channel for flushing through electrode
  • Precision-cast Macro reference element
  • Adapted for automatic changing
  • Fixed index positions 3×120°
  • Weight 1.1 Kg

See drawing >

3R-776.1-2 Hoofd pallet

3R-466.10033 Macro-MacroJunior Manual chuck adapter

  • Axial locking screw with channel for flushing through electrode
  • Adapted for automatic changing
  • Height 100 mm
  • Fixed index positions 3×120°
  • Weight 0.8 Kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-466.4033-S Macro-Junior Manual chuck adapter

  • Axial locking screw with channel for flushing through electrode
  • Precision-cast Macro reference element
  • Adapted for automatic changing
  • Fixed index positions 3×120°
  • Weight 1.1 Kg

 

3R-90356.22 Dynafix Adapter

3R-652.9 Macro-Macro Manual chuck adapter 90°

  • For horizontal mounting of Macro holders
  • Supplied with drawbar for screw locking
  • Rust-resistant
  • Weight 2.4 Kg

See drawing >

3R-776.1-2 Hoofd pallet

3R-653-S Macro-Mini Manual chuck adapter

  • For mounting Mini holders in the Macro system
  • MacroStandard coupling
  • Can be changed automatically
  • Weight 1.3 Kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-656.31-3P measuring probe Renishaw Ø3mm

  • Measuring probe Renishaw probe Ø3mm
  • For machines with measuring cycles
  • Built-inn height 112mm
  • Weight 0.6 Kg

 

3R-90356.22 Dynafix Adapter

3R-656.31-3P measuring probe Renishaw Ø5mm

  • Measuring probe Renishaw probe Ø5mm
  • For machines with measuring cycles
  • Built-inn height 112mm
  • .
  • Weight 0.6 Kg

3R-776.1-2 Hoofd pallet

3R-656.21-SP03 measuring probe Renishaw Ø3mm

  • Measuring probe Ø3mm
  • For machines with measuring cycles
  • Built-inn height 130mm
  • Stiff probe
  • Weight 0.8 Kg

 

3R-90356.22 Dynafix Adapter

3R-US600.3 measuring probe Renishaw Ø5mm

  • Measuring probe Renishaw probe Ø5mm
  • For machines with measuring cycles
  • Built-inn height 112mm
  • Stiff probe
  • Weight 0.6 Kg

 

3R-90356.22 Dynafix Adapter

3R-606 Macro control rod

  • For setting angular positions
  • For setting centering position
  • Ground hole for centering
  • Measuring length 110mm
  • Weight 2.3 Kg

See drawing >

3R-776.1-2 Hoofd pallet

3R-606.1 Macro control ruler

  • For setting angular positions
  • For setting centering position
  • Ground hole for centering
  • Measuring length 100mm
  • Weight 1.4 Kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-656.1 Macro control ruler

  • For setting angular positions
  • For setting centering position
  • Ground diameter for centering
  • Measuring diameter 50mm
  • Weight 0.8 Kg

See drawing >

 

3R-90356.22 Dynafix Adapter

3R-656 Macro control rod

  • For setting angular positions
  • For setting centering position
  • Ground diameter for centering
  • Measuring length 38mm
  • Weight 1 Kg

See drawing >

3R-776.1-2 Hoofd pallet

3R-6.600-VHS Macro chuck, Rotating spindle

  • Flushing via flushing connection
  • For vertical and horizontal mounting die-sinking
  • Speed range 60-1500 rev/min
  • Max. electrode weight 5 kg
  • Weight 9.5 kg

See drawing >

 

Spare parts

Q

Nog geen producten