Macro WEDM & Macro B-axes, The broadest product range on the market

  • By consistent use of 3R technology, you can transfer accessories between different machines
  • You can do this without loss of accuracy, since the accessory connection repeats to within two thousandths of a millimetre
  • If you use a Macro chuck as basic equipment on your machine, you can interconnect all your machines to form a single system
  • Move the workpiece from WEDM to EDM to grinding machine, all without subsequent alignment – quickly and precisely
  • And if you choose an automatic Macro chuck, you can operate round-the-clock production if you wish.
Brochure macro wedm

Brochure macro wedm

 

Features

  • Max. work piece weight 15Kg
  • Clamping force 7000N
  • Repeatability <0.002mm
  • High accuracy
  • High stability
  • New system for higher flushing pressure

Chucks

3R-602.26

3R-602.26 Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.5RS
  • Weight 1.1 Kg

See drawing >

3R-602.27

3R-602.27 Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.27RS
  • Weight 1.1 Kg

See drawing >

3R-602.10-1

3R-602.10-1 Automatic pneumatic table chuck

  • Required air pressure 6±1 bar
  • Clamping force 7000N
  • Recommended drawbar 3R-605.10
  • Air-blast cleaning of the Z-references
  • Weight 1.1 Kg

See drawing >

3R-460.46

3R-600.24-4RS Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.2RS
  • Weight 1 Kg

See drawing >

 

3R-600.24RS

3R-600.24RS Manual table chuck

  • Fixed index positions 4×90º
  • Clamping force 6000N
  • Recommended drawbar 3R-605.27RS
  • Weight 1.1 Kg

See drawing >

3R-602.4-1

3R-602.4.1 Automatic pneumatic table chuck

  • Required air pressure 6±1 bar
  • Clamping force 4500N
  • Recommended drawbar 3R-605.1RS
  • Air-blast cleaning of the Z-references
  • Weight 3.7 Kg

See drawing >

3R-602.4-1

3R-217-1 Macro 3R-block manual

  • Clamping force 6 kN
  • Fixed index positions 24×15°
  • Required drawbar 3R-605.2RS
  • Tightening torque 6 Nm
  • Vernier scale
  • Weight 5.4 Kg

See drawing >

Pallets

3R-262HP

3R-262HP Leveling adapter Macro

  • Adjustable in three axes
  • Adapted for automatic changing
  • Ready for code carrier
  • Recommended maximum load 15 kg
  • Weight 2.4 Kg

See drawing >

 

3R-622.6

3R-622.6 Manual macro chuckling

    • Chuck adapter for mounting 90° Macro holders
    • Supplied with drawbar 3R-605.5RS
    • Fixed index positions 4×90º
    • Ready for code carrier holder 3R-U30638
    • Weight 2.3 Kg

    See drawing >

    3R-206.10

    3R-206.10 Master pallet

    • Master for horizontal Macro chucks
    • One long side ground to the Macro references
    • Supplied with engraved dimensions
    • Supplied with drawbar 3R-605.10

    3R-606

    3R-606.2 Master pallet

    • Master for vertical Macro chucks
    • Cylinder ground to the Macro references
    • Supplied with engraved dimensions
    • Supplied without drawbar

    Vices

    3R-293.33

    3R-208.6 Macro Vee Block

    • Rust resistant steel hardened
    • Equipped with 70x70x12.5 Macro reference element
    • Maximum load weight 15 Kg
    • Adjustable (up, down)
    • Weight .. Kg

    See drawing >

     

    3R-293.33

    3R-237.2 Holder

    • For fixture, workpiece or 3R-239.2, 3R-239.3,
      3R-294.1, 3R-294.2, 3R-294.6 and 3R-402.1.
    • Recommended maximum workpiece weight 7 Kg
    • Weight 0.6 Kg

    See drawing >

    3R-293.33

    3R-292.1 SuperVice

    • Vice for horizontal clamping of rectangular workpieces <77 mm
    • Recommended maximum workpiece weight 3 Kg
    • Recommended tightening torque 3 Nm
    • Weight 0.6 Kg

    See drawing >

    3R-292.3S

    3R-292.2 SuperVice

      • Vice for horizontal clamping of rectangular workpieces <100 mm
      • Recommended maximum workpiece weight 5 Kg
      • Recommended tightening torque 3.5 Nm
      • Weight 0.9 Kg

      See drawing >

      3R-292.23

      3R-292.23 Angled holder

        • Supplemented with 3Ruler accessories
        • Weight 3 Kg

        See drawing >

        3R-294

        3R-292.3 SuperVice

        • Vice for horizontal clamping of rectangular workpieces <100 mm
        • Recommended maximum workpiece weight 7 Kg
        • Recommended tightening torque 7 Nm
        • Weight 1.1 Kg

        See drawing >

        3R-293.33

        3R-292.31 SuperVice

        • Vice with solid jaws for horizontal clamping workpieces <100mm
        • Recommended maximum workpiece weight 7 Kg
        • Recommended tightening torque 7 Nm
        • Weight 1.1 Kg

        See drawing >

         

        3R-292.3S

        3R-292.3S Universal holder

        • Holder for round workpieces <90 mm
        • Rectangular workpieces up to 100×90 mm
        • Maximum workpiece weight 7 kg
        • Recommended tightening torque 4 Nm
        • Weight 2.3 Kg

        See drawing >

         

        3R-292.3S

        3R-292.6HP SuperVice Magnum

          • Vice for horizontal clamping workpieces <155 mm
          • Note: Mounts on HP, Magnum or MacroTwin levelling adapter
          • Maximum workpiece weight 12 Kg
          • Tightening torque 15 Nm
          • Weight 2.8 Kg

          See drawing >

          3R-294

          3R-292.6S SuperVice Magnum

          • Vice for horizontal clamping of rectangular workpieces >150 mm
          • Note: Mounts on HP, Magnum or MacroTwin levelling adapter
          • Maximum workpiece weight 12 Kg
          • Tightening torque 10 Nm
          • Weight 2.7 Kg

          See drawing >

          3R-293.33

          3R-292.61HP SuperVice

          • Vice with solid jaws for clamping <150mm
          • Maximum workpiece weight 12 Kg
          • Recommended tightening torque 15 Nm
          • Weight 2.8 Kg

          See drawing >

          3R-294

          3R-292.66HP Magnum holder

          • Supplemented with 3Ruler accessories
          • Mounts on HP mounting head
          • Weight 3 Kg

          See drawing >

          3R-292.3S

          3R-292.92 SuperVice

            • Vice with 30-degree dovetail connection
            • Removable middle jaw allows clamping
            • Maximum weight 7 Kg
            • Tightening torque 7 Nm
            • Weight 1.1 Kh

            See drawing >

            3R-294

            3R-293.3 SuperVice

            • Vice for horizontal clamping of round workpieces 8-90 mm
            • Recommended maximum workpiece weight 7 Kg
            • Recommended tightening torque 7 Nm
            • Weight 1.7 Kg

            See drawing >

            3R-293.33

            3R-293.33 Universal holder

            • Holder for round workpieces 8-100 mm
            • Rectangular workpieces up to 100 mm
            • Recommended maximum workpiece weight 7 kg
            • Recommended tightening torque 3 Nm
            • Weight 1.5 Kg

            See drawing >

            3R-293.33

            3R-293.6HP SuperVice Magnum

            • Vice for horizontal clamping of round workpieces 15-155 mm
              Note: Mounts on HP, Magnum or MacroTwin levelling adapter
            • Maximum workpiece weight 12 Kg
            • Recommended tightening torque 15 Nm
            • Weight 4.5 Kg

            See drawing >

             

            3R-294

            3R-294 Adapter

            • For mounting 3R-294.1 on a levelling adapter
            • For mounting 3R-294.2 on a levelling adapter
            • For mounting 3R-294.6 on a levelling adapter
            • Recommended maximum load 7 Kg
            • Weight 0.6 Kg
            3R-294.1

            3R-294.1 Vice

            • For clamping work pieces up to 17 mm
            • Mounts on 3R-237.2, 3R-294 or 3Ruler system
            • Maximum work piece weight 2.5 Kg
            • Recommended tightening torque 3 Nm
            • Weight 0.5 Kg

            See drawing >

             

            3R-294.2

            3R-294.2 Vice

            • Mounts on 3R-237.2, 3R-294, 3R-292.66HP
            • Mounts in the 3Ruler system or Macro element
            • Maximum workpiece weight 5 Kg
            • Recommended tightening torque 3 Nm
            • Weight 1.2 Kg

            See drawing >

            3R-294.3

            3R-294.3 Vice

            • Vertical clamping of workpieces up to 100mm
            • Maximum workpiece weight 7 Kg
            • Recommended tightening torque 7 Nm
            • Weight 0.7 Kg
            3R-294.1

            3R-294.4 Vice

            • Vertical clamping of workpieces up to 25mm
            • Maximum workpiece weight 7 Kg
            • Recommended tightening torque 3 Nm
            • Weight 1.4 Kg
            3R-292.23

            3R-294.6 Multiple holder

              • For simultaneous mounting of four workpieces
                Ø5-13 mm. Mounts on 3R-237.2, 3R-294, 3R-
                292.66HP or a ruler in the 3Ruler system
              • Recommended tightening torque 3 Nm
              • Weight 0.6 Kg

              See drawing >

              Spare parts

              3R-SSP012

              3R-SSP012 Service set 3R-602.10-1

              • Spare part kit for 3R-602.10-1
              • Complete set
              • For yearly maintenance
              3R-SSP012

              3R-SSP034, spare part set Jaws for 3R-292.3

              Movable jaws. Screw, nut and washer for 3R-292.3

              3R-SSP012

              3R-SSP035, spare part set Jaws for 3R-292.6HP

              Movable jaws. Screw, nut and washer for 3R-292.6HP

              3R-SSP012

              3R-SSP036, spare part set Jaws for 3R-292.31

              Movable jaws. Screw, nut and washer for 3R-292.31

              3R-SSP012

              3R-SSP037, spare part set Jaws for 3R-293.3

              Movable jaws. Screw, nut and washer for 3R-293.3

              3R-SSP012

              3R-SSP038, spare part set Jaws for 3R-213.4

              Movable jaws. Screw, nut and washer for 3R-213.4